Tyre Extension Valve
$2.45
In stock
- Fast shipping from Sydney
- Free shipping on orders over $99
| Quantity |
1 (single) |
|---|
Tesla wheel covers look sharp, but they make the valve stem awkward to reach. Fighting with a pump nozzle in a tight recess turns a two-minute job into a frustrating one. This 39mm extension valve lengthens the stem so the valve sits clear of the cover. Check and top up your tyre pressure in seconds — no removing wheel covers, no bent fingers.
Key Features
- 39mm extension — brings the valve out past the wheel cover, so any standard pump nozzle connects first time.
- Fits all Tesla models — Model 3, Model Y and Model Y L, with a universal thread that matches the factory valve stem.
- Tool-free fitting — screws straight onto the existing stem by hand in a few seconds per wheel.
- Keeps your covers on — maintain tyre pressure without unclipping or scratching the wheels every time.
Which Tesla does the Tyre Extension Valve fit?
The Tessories Tyre Extension Valve fits the Model 3 (2019–2026), Model Y (2022–2026) and Model Y L (2026). The 39mm extension screws onto the factory valve stem by hand, so the valve sits clear of the wheel cover.
Why are wheel covers so awkward when you check tyre pressure?
Wheel covers sit over the valve stem and leave it in a tight recess that a pump nozzle struggles to reach. The Tyre Extension Valve adds 39mm of length and brings the valve out past the cover. A two-minute job stays a two-minute job — no bent fingers, no fighting the nozzle.
How do you fit the Tyre Extension Valve?
The Tyre Extension Valve screws straight onto the existing valve stem by hand, in a few seconds per wheel. No tools are needed. Its universal thread matches the factory valve stem, so nothing has to be adapted or replaced. Fit all four and the valves stay easy to reach from then on.
Is an extension valve better than taking the wheel covers off each time?
Yes. Unclipping a wheel cover for every pressure check risks scratching the wheel and adds minutes to a simple job. The Tessories Tyre Extension Valve leaves the covers in place by lifting the valve 39mm clear of them. You keep the look of the covers and the ease of an exposed stem.
Does the Tyre Extension Valve work with a standard pump nozzle?
Yes. The 39mm extension holds the valve out past the wheel cover, so any standard pump nozzle connects first time — at home or at a service station. There is no tight recess to work around, which means topping up tyre pressure takes seconds instead of several awkward attempts.
Is a 39mm extension valve worth it if you check your tyres often?
If you check tyre pressure regularly, yes. Each check normally means unclipping a wheel cover and reaching into a recess. The Tyre Extension Valve removes both steps for good after one hand-tight fitting, and the 39mm stem extension keeps the valve in the open where a pump nozzle can reach it.
Related products
